Noromycin 300 LA (oxytertracycline injection)

Noromycin 300 LA (oxytertracycline injection)
300mg/mL, 100mL - injection
300mg/mL, 250mL - injection
300mg/mL, 500mL - injection
SKU : 33375_-RX
Price: $25.25
Price: $25.25

Veterinarian Prescription (Rx) Required
Free Shipping on orders over $75 
Low Price Match Guarantee
  • Proven efficacy across a wide range of diseases
  • A convenient lower dose volume for easier administration
  • Non-prescription. Available from animal health suppliers
  • A well-tolerated formulation, particularly when administered subcutaneous (SQ) in the neck area
  • Economical
  • Available Sizes
    • 100 mL
    • 250 mL
    • 500 mL
How to Order Prescriptions

Description

Noromycin 300 LA is a sterile, ready to use solution of the broad-spectrum antibiotic oxytetracycline dihydrate. Oxytetracycline is an antimicrobial agent that is effect in treatment of a wide range of diseases caused by susceptible gram-positive and gram-negative bacteria.

Indications

Noromycin 300 LA is intended for use in treatment of the following diseases when due to oxytetracycline-susceptible organisms:

Beef cattle, non-lactating dairy cattle, calves, including pre-ruminating (veal) calves

Noromycin 300 LA is indicated in the treatment of pneumonia and shipping fever complex associated with Pasteurella spp., and Histophilus spp. Noromycin 300 LA is indicated for the treatment of infectious bovine keratoconjunctivitis (pink eye) caused by Moraxella bovis, foot-rot and diphtheria caused by Fusobacterium necrophorum; bacterial enteritis (scours) caused by Escherichia coli; wooden tongue caused by Actinobacillus lignieresii; leptospirosis caused by Leptospira Pomona; and wound infections and acute metritis caused by strains of staphylococcal and streptococcal organisms sensitive to oxytetracycline. 

Swine

Noromycin 300 LA is indicated in the treatment of bacterial enteritis (scours, colibacillosis) caused by Escherichia coli; pneumonia caused by Pasteurella multocida; and leptospirosis caused by Leptospira pomona. 

In sows, Noromycin 300 LA is indicated as an aid in control of infectious enteritis (baby pig scours, colibacillosis) in suckling pigs caused by Escherichia coli. 

Dosage and Administration

Beef cattle, non-lactating dairy cattle, calves, including pre-ruminating (veal) calves

A single dosage of 9 mg of oxytetracycline per pound of bodyweight administered intramuscularly or subcutaneously is recommended in the treatment of the following conditions:
  1. Bacterial pneumonia caused by Pasteurella spp (shipping fever) in calves and yearlings where retreatment is impractical due to husbandry conditions, such as cattle on range, or where their repeated restraint is inadvisable. 
  2. Infectious bovine keratoconjunctivitis (pink eye) caused by Moraxella bovis.
For other indications Noromycin 300 LA  is to be administered intramuscularly, subcutaneously or intravenously at a level of 3 to 5mg of oxytetracycline per pound of bodyweight per day. In treatment of foot-rot and advanced cases of other indicated diseases, a dosage level of 5 mg per pound of bodyweight per day is recommended. Treatment should be continued 24 to 48 hours following remission of disease signs, however, not to exceed a total of four (4) consecutive days. If improvement is  not noted within 24 to 48 hours of the beginning of treatment, diagnosis and therapy should be re-evaluated by a veterinarian.

Do not administer intramuscularly in the neck of small calves due to lack of sufficient muscle mass. 

Use extreme care when administering this product by intravenous injection. Perivascular injection or leakage from an intravenous injection may cause severe swelling at the injection site.

Swine

A single dosage of 9mg of oxytetracycline per pound of bodyweight administered intramuscularly is recommended in the treatment of bacterial pneumonia caused by Pasteurella multocida in swine, where retreatment is impractical due to husbandry conditions or where repeated restraint is inadvisable. 

Noromycin 300 LA can also be administered by intramuscular injection at a level of 3 to 5mg of oxytetracycline per pound of bodyweight per day. Treatment should be continued 24 to 48 hours following remission of disease signs; however, not to exceed a total of four (4) consecutive days. If improvement is not noted within 24 to 48 hours of the beginning of treatment, diagnosis and therapy should be re-evaluated by a veterinarian. 

For sows, administer once intramuscularly 3mg of oxytetracycline per pound of bodyweight approximately eight (8) hours before farrowing or immediately after completion of farrowing as an aid in the control of infectious enteritis in baby pigs. 

For swine weighing 25 lbs of bodyweight and under, Noromycin 300 LA should be administered undiluted for treatment at 9mg/lb but should be administered for treatment at 3 or 5mg/lb.

              9mg dosage of undiluted Noromycin 300 LA                               3 or 5 mg/lb of diluted Noromycin 300 LA 
Bodyweight   9mg/lb       3mg/lb      Dilution*           5mg/lb          
 5lb 0.15mL 0.4mL 37.5mg/mL 0.7mL
 10 lb 0.30mL 0.6mL 50mg/mL 1.0mL
25lb 0.75mL 1.0mL 75mg/mL 1.7mL
*To prepare dilutions, add one part of Noromycin 300 LA to three (3), five (5) or seven (7) parts of the sterile water, or 5% dextrose solution as indicated; the diluted product should be used immediately. 

Directions for Use

Noromycin 300 LA is intended for use in the treatment of disease due to oxytetracycline-susceptible organisms in beef cattle, non-lactating dairy cattle and swine. A thoroughly cleaned, sterile needle and syringe should be used for each injection (needles and syringes may be sterilized by boiling in water for 15 minutes). In cold weather Noromycin 300 LA should be warmed to room temperature before administration to animals. Before withdrawing the solution from the bottle, disinfect the rubber cap on the bottle with suitable disinfectant, such as 70 percent alcohol. The injection site should be similarity cleaned with disinfectant. Needles of 16 and 818 gauge and 1 to 1 and 1/2 inches long are adequate for intramuscular or subcutaneous injections. Needles of 2 to 3 inches in length are recommended for intravenous use. 

Intramuscular Administration

Intramuscular injections should be made by directing the needle of suitable gauge and length into the fleshy part of a think muscle such as in the neck, rump, hip or thigh regions; avoid blood vessels and major nerves. Before injecting the solution, pull back gently on the plunger. If blood appears in the syringe, a blood vessel has been entered; withdraw the needle and select a different size. 

No more than 10mL should be injected intramuscularly at any one site in adult beef cattle and non-lactating dairy cattle, and not more than 5mL per site in adult swine; rotate injection sites for each succeeding treatment. The volume administered per injection site should be reduced according to age and body size so that 1 to 2mL per site is injected in small calves.  Subcutaneous Administration Subcutaneous injections should be made by directing the needle of suitable gauge and length through the loose folds of the neck skin in front of the shoulder. Care should be taken to ensure that the tip of the needle is penetrated the skin but is not lodged in the muscle. Before injecting the solution, pull back gently on the plunger. If blood appears in the syringe, a blood vessel has been entered; withdraw the needle and select a different site. The solution be injected slowly into the area between the skin and muscles. No more than 10 mL should be injected subcutaneous at any one site in adult beef cattle and non-lactating dairy cattle; rotate injection sites for each succeeding treatment. The volume administered per injection site should be reduced according to age and body size so that 1 to 2mL per site is injected in small calves. 

Intravenous Administration

Noromycin 300 LA may be administered intravenously to beef cattle and non-lactating dairy cattle. As with al highly concentrated materials, Noromycin 300 LA should be administered slowly by the intravenous route.

Preparation of the Animal for Injection

  1. Approximate location of vein. The jugular veins runs into the jugular groove on each side of the neck from the angle of the jaw to just above the brisket and slightly above and to the side of the windpipe. 
  2. Restraint. A stanchion or chute is ideal for restraining the animal. With a halter, rope, or cattle leader (nose thongs), pull the animal's head around the side of the stanchion, cattle chute, or post in such a manner to form a bow in the neck, the snub the head securely to prevent movement. By forming the bow in the neck, the outside curvature of the bow tends to expose the jugular vein and make it easily accessible. Caution: Avoid restraining the animal with a tight rope or halter around the throat or upper neck which might impede blood flow. Animals that are down present no problem so far as restraint is concerned. 
  3. Clip hair in area where injection is to be made (over the vein in the upper third of the neck). Clean and disinfect the skin with alcohol or other suitable antiseptic.

Entering the Vein and Making the Injection

  1. Raise the vein. This is accomplished by tying the choke rope tightly around the neck close to the shoulder. The rope should be tied in such a way that it will not come loose and so that it can be untied quickly by pulling the loose end. In thick-necked animals, a block of wood placed in the jugular groove between the rope and the hide will help considerably in applying the desired pressure at the right point. The vein is a soft flexible tube through which blood flows back to the heart. Under ordinary conditions it cannot be seen or felt with the fingers. When the flow of blood is blocked at the base of the neck by the choke rope, the vein becomes enlarged and rigid because of the back pressure. If the choke rope is sufficiently tight, the vein stands out and can be easily seen and felt in thin-necked animals. As a further check in identifying the vein, tap it with the fingers in front of the choke rope. Pulsations that can be seen or felt with the fingers in front of the point bring tapped will conform the fact that the vein is properly distended. It is impossible to put the needle into the vein unless it is distended. Experienced operators are able to raise the vein simply by hand pressure, but the use of a choke rope is more certain.
  2. Inserting the needle. This involves three distinct steps. First, insert the needle through the hide. Second, insert the needle into the vein. This may require two or three attempts before the vein is entered. The vein has a tendency to roll away from the point of the needle, especially if the needle is not sharp. The vein can be steadied with the thumb and finger of one hand. With the other handle the needle point is placed directly over the vein, slanting it so that its direction is along the length of the vein, either toward the head or toward the heart. Properly positioned this way, a quick thrust of the needle will ber followed by a spurt of blood through the needle, which indicates that the vein has been entered. Third, once in the vein, the needle should be inserted along the length of the vein all the way to the hub, exercising caution to see that the needle does not penetrate the opposite side of the vein. Continuous steady flow of blood through the needle indicates that the needle is still in the vein. If blood does not flow continuously, the needle is out of the vein (or clogged) and another attempt must be made. If difficulty is encountered, it may be advisable to use the vein on the other side of the neck.
  3. While the needle is being placed in proper position in the vein, an assistant should get the medication ready so that the injection can be started without delay after the vein has been entered. 
  4. Making the injection. With the needle in position as indicated by continuous flow of blood, release the choke rope by a quick pull on the free end. This is essential - the medication cannot flow into the vein while it is blocked. Immediately connect the syringe containing OXYTETRACYCLINE to the needle and slowly depress the plunger. If there is resistance to depression of the plunger, this indicates that the needle has slipped out of the vein (or is clogged) and the procedure will have to be repeated. Watch for ant swelling under the skin near the needle, which would indicate that the medication is not going into the vein. Should this occur, it is best to try the vein on the opposite side of the neck. 
  5. Removing the needle. When injection is complete, remove needle with straight pull. Then apply pressure over area of injection momentarily to control ant bleeding through needle puncture, using cotton soaked in alcohol or other suitable antiseptic. 

Precautions

Exceeding the highest recommended level of drug per pound of bodyweight per day, administering more than the recommended number of treatments, and/or exceeding 10mL intramuscularly or subcutaneously per injection site in adult beef cattle and non-lactating dairy cattle and 5mL intramuscularly per injection site in adult swine, may result in antibiotic residues beyond the withdrawal time. 

Consult with your veterinarian prior to administering this product in order to determine the proper treatment required in the event of an adverse reaction. At the first sign of any adverse reaction, discontinue use of the product and seek the advice of your veterinarian. Some of the reactions may be attributable either to anaphylaxis (an allergic reaction) or to cardiovascular collapse of unknown cause.

Shortly after injection treated animals may be transient hemoglobinuria resulting in darkened urine. 

As with all antibiotic preparations, use of this drug may result in overgrowth of non-susceptible organisms, including fungi. The absence of a favorable response following treatment, or the development of new signs or symptoms may suggest an overgrowth of non-susceptible organisms. If superinfections occur, the use of this product should be discontinued and appropriate specific therapy should be instituted. 

Since bacteriostatic drugs may interfere with the bactericidal action of penicillin, it is advisable to avoid giving Noromycin 300 LA in conjunction with penicillin. 

Storage

Store at 59 degrees to 86 degrees Fahrenheit (15 degrees to 30 degrees Celsius). Keep from freezing. For 100mL size: Use within 60 days of first puncture and puncture a maximum of 24 times. For 250mL and 500mL sizes: Use within 60 days of first puncture and puncture a maximum of 36 times. If using a needle or draw-off spike larger than 16 gauge, discard any remaining product immediately after use. 
Loading...